Leather & Vinyl paint for Mercedes car upholstery, VIPER PROMAX provides one of the strongest protective barriers on the market, while remaining extremely flexible, soft and with a completely natural feel. VIPER PROMAX has "Tri Coat Technology" and can be used on leather, vinyl and hard plastic (the latter with a primer).

VIPER PROMAX provides a permanent finish that does not discolor to clothing or anything else that may come into contact with the finish.

If you buy only the color, Safe-Link (hardener) is already mixed in the paint and should be used within 2 months of delivery.

(scroll down for color map and illustration videos)

Coloring Kit Contains (Small/Medium/Large/XL)

- Cleaning Leather/Vinyl (30/50/100/200)

- Silicone Remover (100/200/500ml)

- Prep (50/100/200/500ml)

- Color (50/100/200/500ml)

- Top Coat (50/100/200/500)

- Safe-Link (10% hardener to Top Coat)

- Protection cream (30/50/100/200ml)

- Applicator sponge for Color

- Applicator sponge for Top Coat

- Terry cloths

- Lint-free cloths

- Sandpaper (280 & 1200)

- Detailed instructions with QR code to video

Instructions

1. Thoroughly clean the leather or vinyl surface 2 times with cleaner.

2a. Clean the leather or vinyl surface thoroughly 2 times with Silicone Remover and a terry towel.

2b. Sand all leather surfaces with Slip-Pad 500 (NOT Vinyl, go directly to 2c).

2c. Thoroughly clean the leather or vinyl surface 2 more times with Silicone Remover and a terry towel.

3a. Thoroughly clean the leather or vinyl surface 2 times with Leather Prep or T-1 Prep (vinyl) and a terry towel.

3b. Sand all leather surfaces with Slip-Pad 500 (NOT Vinyl, go directly to 3c).

3c. Clean the leather or vinyl surface thoroughly 2 times with Leather Prep or T-1 Prep (vinyl) and a terry towel., then you are done with the preparations for staining.

4a. The first and second color layers are massaged in with a semi-soft sponge in thin layers. Then you can easily get into hard-to-reach nooks and crannies and make sure there is paint everywhere.

4b. Apply the number of layers of paint required to achieve the desired result. The color should be "dabbed" on in thin layers when applying. Airbrush Kit & Preval Sprayer gives you thin fine layers of paint. Lightly sand before applying the final color layer with sand pad 2000

5. Apply 3-4 coats of Top Coat mixed with 10% Safe-Link to further seal and reinforce the surface. The first layer is applied like brush painting with a semi-soft sponge.

6. Apply the protective cream after 12-24 hours for the best protective barrier.